next »

I think that there is some confusion of the settings on the Searching tab and the Close Call tab.

The Srch/CloCall Opt menu has settings for Tone/Code Search and Audio AGC which should probably therefore be on the Searching tab rather than on the Close Call tab.  That menu also has a P25 Waiting Time setting which appears to be missing.

Conversely, the Close Call/Hits with Scan menu has a setting for Hold Time which should therefore be on the Close Call tab rather than on the Searching tab.  Perhaps the CC Delay setting should actually be the Hold Time since I don't see a Delay Time setting in the menu structure for Close Call/Hits with Scan.   That menu also has settings for Number Tag and Lockout that appear to be missing.

Thanks.

Dick

Many settings are shared in between Close Class and Quick Search, so it effects both equally. As such I need to put them in one page or another.

I'll look into that P25 waiting time and the other settings you mentioned.

Yes, I see where that's the case with the Tone/Code Search and Audio AGC settings which are shared.

The P25 Waiting Time that I think is missing would be a shared setting also.

It doesn't appear that there's a shared Hold Time setting since there's one on the Close Call/Hits with Scan menu that's separate from the ones on the Search for .../Edit Service/[name of service]/Search with Scan menus.  Since there doesn't appear to be a setting in the menus for Delay in Close Call/Hits with Scan, I thought that the CC Delay setting on the Close Call tab should really be Hold Time instead.

The Close Call/Hits with Scan settings for Number Tag and Lockout that I think are missing do not appear to be shared settings.

BTW, all of this is on the 396XT.  As far as the programming of the 396XT, it would be more clear if the shared settings were on a tab labeled Srch/CloCall Opts as is the menu entry, but I realize that might not be appropriate for some of the other scanner models.

Thanks.
Dick